YOUR BRAND.
YOUR BOTTLE.
YOUR NAME ON THE LID. YOURS ALONE.
Your logo 3D embossed on the lid, not stuck on it. Custom shaker bottles at volume for supplement brands, gym chains, and the people who don't hand out junk.
HERO VIDEO OR HERO STILL
Your main custom-bottle hero shot or clip. Builder drops the hosted video in here on the live build — no file in this mockup.
HERO VIDEO OR HERO STILL
Your main custom-bottle hero shot or clip. Builder drops the hosted video in here on the live build — no file in this mockup.
Your name. Only yours.
Embossed, not stuck on — your name raised right into the lid. Most custom shakers keep their own brand on the lid and put yours off to the side. Here the lid is yours.
Your name only
The lid carries your name alone — no co-brand, no logo riding above yours. It's the bottle, branded as yours.
Reads as yours
A 3D embossed lid looks like your own product, not your logo on someone else's bottle.
Permanent
Raised into the lid, so unlike a printed logo it won't peel, fade, or wash off. Top-rack and all.
IMAGE — FULL WIDTH · THE DIFFERENCE
The big embossed-lid close-up, shown full width like the live site. The tight crop is what makes the raised logo read at this size, so keep it tight, don't pull back.
KEEP current "embossed_not_stuck_on" image · now FULL WIDTH (was a small two-col image)
Make it yours
Your logo.
Your colors.
3D emboss the lid, print the body, or both. Then choose the color of every part. Build the bottle your brand would actually carry.
Customize parts
Every part. Any color. Your logo.
Any color. You don't even have to name it.
Know your Pantone? Tell us. Don't? Just send your logo or brand assets and we'll match the colors for you — no PMS code needed.
FOR REAL BRANDS
NEWSixty seconds.
Mockup by tomorrow.
The mockup shows the idea. A sample is the real bottle in your hands, your logo on it, before you commit to a run. We set these up for brands we're a fit to work with — so start your quote, tell us about your brand, and if it's a fit we'll send one out.
And if you're a real brand placing a serious run, the free mockup isn't where it ends — we'll get an actual sample bottle in your hands. More on that below.
IMAGE — SAMPLE IN HAND
A real branded bottle held in hand, or a clean sample shot. Sells the "hold the real thing" promise.
NEW asset
BUILT FOR VOLUME
Priced for big runs.
The embossing's on us.
The bigger the run, the lower the unit price. One-side embossing is included at 2,500 units and up; both sides at 10,000 and up. Below that you can still add it, with the $600 setup on your quote. Either way it's a one-time fee: pay it once or earn it free, and every reorder skips it for good, even at a million units.
Drag to estimate — land between stops and your price lands between too. We quote the real volume you enter; your exact per-unit comes in the quote. Ballpark FOB China, standard build; delivered-to-your-door (freight + duties) runs higher, and the weighted-whisk upgrade is extra.
HOW IT WORKS
From your logo to your door
Four steps, no guesswork. Here's exactly what happens after you reach out.
Tell us what you need
Your bottle, your branding, and your volume — straight from the form below. Takes a couple of minutes.
Get a free mockup
We put your logo and colors on a real bottle and send it back, usually within a day. No charge, no commitment.
Approve & we produce
Sign off on the proof and we start your run.[Confirm production lead time by volume]
Delivered to your door
We ship it to you all-in, or hand off FOB China if you'd rather run your own freight.
HERITAGE
We've been doing this
for 14 years.
We've been building and patenting shaker bottles since 2012 — long enough to get the seal, the threads, and the lid right. All of that goes into the bottle your brand ends up on, so you can hand your customers the best-made shaker we know how to make.
Heritage video — pad-printing & QC b-roll
The older (~7–8 yr) footage: pad-printing bottles by hand and the dual-shaker quality-control checks on the line. The age of the clip is the point — it reads as legitimacy, proof there are real people doing the work and that we've been at it for years. Loop it muted. Builder drops the hosted clip in here later — more b-roll exists beyond pad-printing.
Existing footage — no new asset needed
option: overlay the brand names/logos on the video instead of the strip below — your call
Brands we've built bottles for
[ LOGO: Rogue ]
Logo_Rogue.png[ LOGO: GNC ]
Logo_GNC.png[ LOGO: MusclePharm ]
Logo_MP.png[ LOGO: Alphalete ]
Logo_Alphalete.png[ LOGO: Nutrishop ]
Logo_Nutrishop.pngGET A QUOTE
Get your pricing and a free mockup
Three quick steps, about a minute. Your basics, your colors, your volume — then we come back with pricing, a timeline, and your free mockup, usually within a day.
What you're building
The basics that drive your quote.
Heads up — embossing starts at 1,000. For a smaller run, pad printing starts at 250, or keep the embossed lid with a one-time $600 setup (one side). Tell us your numbers and we'll quote it.
Step 1 of 3 shown in place. The full interactive form lives on a separate quote page.
THE BOTTLE ITSELF
NEWBrand the one they actually keep
Most branded bottles are landfill with a free ad on them. This isn't one. Before your logo goes on, it's already a bottle people keep — leak-proof, easy to carry, easy to clean, built for daily use.
Square · transparent bg
Thicker seal / lid close-up
50% Thicker Seal
Seals shut and stays shut. No surprise leaks in a gym bag.
Square · transparent bg
Carry loop hooked on a finger
Hidden Carry Loop
Hook it on a finger, then fold it flat, out of the way.
Square · transparent bg
Rounded base — you have this shot
Rounded Base
No square corners for residue to hide in. Rinses clean.
Square · transparent bg
Scale markings — you have this shot
Scale Markings to 28oz
Measure water and mixes without guessing.
TRY BEFORE YOU COMMIT
NEWHold it before
you commit.
Two ways to get a real bottle in your hands before you order a full run.
See the quality for yourself— Free
We'll send qualified businesses a sample bottle, free, so you can feel the weight, the seal, and the whisk for yourself before you commit to anything. US shipping only. Just add your website in the form so we can confirm the fit, and we'll get one out to you.
See your brand on it— $50
Want to see your own logo and colors on a bottle first? Order a custom printed sample for $50, shipping included and credited to your order when you move forward. (Embossing is tooled with your production run, so the one-off sample is printed — but it still puts your logo and colors on a real bottle in your hands.)
IMAGE — SAMPLE IN HAND
A real branded bottle held in hand, or a clean sample shot — with the included whisk visible so it's clear what ships. Sells the "hold the real thing" promise.
NEW asset
The practical stuff
Questions, answered.
Pick your bottle, pick embossing or printing (or both), send your logo, approve a proof, and we produce your run. Request a quote below and we'll walk you through it.
A one-time $600 for one side, or $1,200 for two sides. On large orders, we include it. Reorders skip the setup.
[Confirm pricing tiers.] Price drops as quantity climbs. Tell us your volume in the quote form and we'll send exact per-unit pricing.
This is a volume program, built for large runs in the thousands, not small batches. [Confirm exact MOQ floor.] Tell us your numbers in the form and we'll confirm the fit.
Plan for real runway. These are produced overseas, so lead times run longer than a domestic blank. [Confirm weeks by volume and method.] We'll give you a firm date with your quote. The earlier you start, the better.
Yes. Send your color references with your logo and we'll match them on the print.
Yes. Order a custom printed sample for $50, shipping included, and we'll put your logo on a real bottle so you can see and feel it before committing to a full run. The $50 is credited to your order when you move forward. One note: samples are printed only. The embossed lid is tooled and set up with your production run, not as a one-off, so it comes with your order rather than on a sample. The printed sample still does the job, your logo, your colors, a real bottle in your hands.
[Confirm current handling.] Your quote reflects landed cost, so the number we give you is the number you pay.
Made in China. Producing overseas is part of how the per-unit price stays competitive at volume, and it's why we ask you to plan for longer lead times.
Ready? Tell us what you're branding.
Pricing, a timeline, and a free mockup — usually within a day.